A quantum leap forward in design and performance with multiple
groundbreaking innovations - the most formidable and sophisticated
sealed subwoofer ever developed.
All-new 17-inch driver with first-ever dual 8-inch voice coils. The
most powerful amplifier ever deployed in a consumer subwoofer with
unprecedented dual mono-block design married to the extreme intelligence
of a 295MHz DSP. All managed by the most sophisticated subwoofer
control app, now with auto EQ room correction (available soon via
over-the-air update).
Frequency Response / Acoustic Data
15Hz to 320Hz +/-3dB
Roll-off slope specifically optimized to take maximum advantage of available room gain.
2-meter ground plane away from reflective structures (quasi-anechoic).
Subwoofer Specs:
Piano Gloss Black and Black Oak Real Wood Veneer finishes
Front Firing 17-inch high-excursion SVS driver
Protective non-resonant extra-thick ABS grille frame with fabric mesh cover to shield driver
Robust Medium Density Fiberboard (MDF) cabinet construction with
internal bracing for resonance free performance at highest drive levels
Screw-in Iso-elastomer feet reduce noise artifacts and improve stability
Amplifier Rear Panel OLED and control interface provide fast and
direct control of the most important features. Includes “Display Flip”
function for viewing upside down from behind
Dimensions (with grille): 20.0” (507mm) H x 19.5” (495mm) W x 21.2” (537mm) D
Dimensions (without grille): 20.0” (507mm) H x 19.5” (495mm) W x 20.3” (516mm) D
Shipped Dimensions: 24.8” (630mm) H X 24.9” (633mm) W X 29.8” (757mm) D
Weight (unboxed): 124.0lbs (56.25kg)
Shipped Weight: 136.0lbs (61.7kg)
Driver Specs:
Proprietary SVS 17-inch long-throw driver with high-precision tuned overhung motor configuration
63.76lb (28.92kg) pound Woofer with 54.17lb (24.57kg) pounds motor
48.9mm Xmax, 81.78mm Xmech precision aligned excursion
8” diameter Voice Coil with high current 4-layer bifilar copper-clad aluminum wire windings
Dual Voice coil design captures power delivery from dual-mono
amplifier outputs into a single voice coil for maximum acoustic output
High Temperature glass-fiber composite former/bobbing
Four-piece high-grade oversized Y35 Ferrite magnet motor produces
effortless on-demand driving-force for subtle and over-the-top low
frequency sonics
Dual shorting rings reduce gap inductance and lower distortion
Dual 25-strand copper-alloy and Nomex composite high-temperature
leads woven through the spider provide a pristine electrical connection
from the amplifiers to the voice coils
Precision machined and narrow tolerance low carbon 1010 steel
top-plate and oversized T-yoke with integrated pole-piece extension for
optimal magnetics and thermal capacity
Dual Nomex extreme excursion linear suspension spiders
Custom injection-molded extreme-excursion catenary SBR rubber
surround ensures flawless pistonic motion for pinpoint control and
accuracy without distortion at reference drive levels
Premium glass-fiber laminated dustcap and vented composite cone
sub-structure with exceptional stiffness-to-mass ratio ensures a light,
ridged, and neutral radiating surface about to move massive amounts of
air with crisp precision
High-density 17” Powder-coated cast aluminum basket FEA optimized
for maximum rigidity, tensile strength, and energy transference
Nickel-plated high-tension spring terminals provide secure connections
Amplifier Specs:
Sledge STA-2800D with 2800 watts RMS continuous power (6000+ watts peak dynamic power)
Dual-mono discrete Class D amplifiers generate endless power from
eight massive 60A 200V MOSFETs, resulting in lower EMI and highest
efficiency
High resolution 295Mhz Analog Devices Audio DSP with double
precision 56bit filtering. Over 5x the processing power of previous
subwoofers, the most advanced subwoofer processor available for flawless
low frequency audio reproduction
Monitors every function of the amplifier ensuring precisely
regulated clean voltage is delivered to and from the switch mode power
supply and maximum current is pushed to the driver’s voice coils
DSP Continuously runs complex power management algorithms and
multi-point thermal, voltage, and current monitoring systems to optimize
AC voltage delivery to the power supply for continuous peak performance
with maximum performance and greatest efficiency
Advanced digital audio processing and DACs (Digital-to-Analog
Converters) with 120 dB Signal-to-Noise Ratio provide greater headroom,
lower noise, and flawless fidelity
All new Switch Mode Power Supply (SMPS) includes a two-stage
100v-240v full range active Power Factor Correction (PFC) to
pre-regulate mains to solid 390V DC regardless of mains voltage or
quality. Ensures a consistent 160V rail voltage for dual-mono amplifiers
over a wide-range of AC voltages
Onboard AC line conditioner filters and stabilizes incoming
voltage, corrects waveform distortions, and eliminates electromagnetic
and radio interferen
A quantum leap forward in design and performance with multiple
groundbreaking innovations - the most formidable and sophisticated
sealed subwoofer ever developed.
All-new 17-inch driver with first-ever dual 8-inch voice coils. The
most powerful amplifier ever deployed in a consumer subwoofer with
unprecedented dual mono-block design married to the extreme intelligence
of a 295MHz DSP. All managed by the most sophisticated subwoofer
control app, now with auto EQ room correction (available soon via
over-the-air update).
Frequency Response / Acoustic Data
15Hz to 320Hz +/-3dB
Roll-off slope specifically optimized to take maximum advantage of available room gain.
2-meter ground plane away from reflective structures (quasi-anechoic).
Subwoofer Specs:
Piano Gloss Black and Black Oak Real Wood Veneer finishes
Front Firing 17-inch high-excursion SVS driver
Protective non-resonant extra-thick ABS grille frame with fabric mesh cover to shield driver
Robust Medium Density Fiberboard (MDF) cabinet construction with
internal bracing for resonance free performance at highest drive levels
Screw-in Iso-elastomer feet reduce noise artifacts and improve stability
Amplifier Rear Panel OLED and control interface provide fast and
direct control of the most important features. Includes “Display Flip”
function for viewing upside down from behind
Dimensions (with grille): 20.0” (507mm) H x 19.5” (495mm) W x 21.2” (537mm) D
Dimensions (without grille): 20.0” (507mm) H x 19.5” (495mm) W x 20.3” (516mm) D
Shipped Dimensions: 24.8” (630mm) H X 24.9” (633mm) W X 29.8” (757mm) D
Weight (unboxed): 124.0lbs (56.25kg)
Shipped Weight: 136.0lbs (61.7kg)
Driver Specs:
Proprietary SVS 17-inch long-throw driver with high-precision tuned overhung motor configuration
63.76lb (28.92kg) pound Woofer with 54.17lb (24.57kg) pounds motor
48.9mm Xmax, 81.78mm Xmech precision aligned excursion
8” diameter Voice Coil with high current 4-layer bifilar copper-clad aluminum wire windings
Dual Voice coil design captures power delivery from dual-mono
amplifier outputs into a single voice coil for maximum acoustic output
High Temperature glass-fiber composite former/bobbing
Four-piece high-grade oversized Y35 Ferrite magnet motor produces
effortless on-demand driving-force for subtle and over-the-top low
frequency sonics
Dual shorting rings reduce gap inductance and lower distortion
Dual 25-strand copper-alloy and Nomex composite high-temperature
leads woven through the spider provide a pristine electrical connection
from the amplifiers to the voice coils
Precision machined and narrow tolerance low carbon 1010 steel
top-plate and oversized T-yoke with integrated pole-piece extension for
optimal magnetics and thermal capacity
Dual Nomex extreme excursion linear suspension spiders
Custom injection-molded extreme-excursion catenary SBR rubber
surround ensures flawless pistonic motion for pinpoint control and
accuracy without distortion at reference drive levels
Premium glass-fiber laminated dustcap and vented composite cone
sub-structure with exceptional stiffness-to-mass ratio ensures a light,
ridged, and neutral radiating surface about to move massive amounts of
air with crisp precision
High-density 17” Powder-coated cast aluminum basket FEA optimized
for maximum rigidity, tensile strength, and energy transference
Nickel-plated high-tension spring terminals provide secure connections
Amplifier Specs:
Sledge STA-2800D with 2800 watts RMS continuous power (6000+ watts peak dynamic power)
Dual-mono discrete Class D amplifiers generate endless power from
eight massive 60A 200V MOSFETs, resulting in lower EMI and highest
efficiency
High resolution 295Mhz Analog Devices Audio DSP with double
precision 56bit filtering. Over 5x the processing power of previous
subwoofers, the most advanced subwoofer processor available for flawless
low frequency audio reproduction
Monitors every function of the amplifier ensuring precisely
regulated clean voltage is delivered to and from the switch mode power
supply and maximum current is pushed to the driver’s voice coils
DSP Continuously runs complex power management algorithms and
multi-point thermal, voltage, and current monitoring systems to optimize
AC voltage delivery to the power supply for continuous peak performance
with maximum performance and greatest efficiency
Advanced digital audio processing and DACs (Digital-to-Analog
Converters) with 120 dB Signal-to-Noise Ratio provide greater headroom,
lower noise, and flawless fidelity
All new Switch Mode Power Supply (SMPS) includes a two-stage
100v-240v full range active Power Factor Correction (PFC) to
pre-regulate mains to solid 390V DC regardless of mains voltage or
quality. Ensures a consistent 160V rail voltage for dual-mono amplifiers
over a wide-range of AC voltages
Onboard AC line conditioner filters and stabilizes incoming
voltage, corrects waveform distortions, and eliminates electromagnetic
and radio interferen
